Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Plug in resistorDescription: RS20H11AA02T pallet22275+$5.968425+$5.526350+$5.2168100+$5.0842500+$4.99572500+$4.88525000+$4.841010000+$4.7747 -
![]()
Category: Plug in resistorDescription: Res POT 50KΩ 20% (35 X 27mm) Pin Thru-Hole92665+$3.815125+$3.532550+$3.3347100+$3.2499500+$3.19342500+$3.12275000+$3.094510000+$3.0521 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.5191 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.7461 -
![]()
Category: Plug in resistorDescription: RWM 8x45 Series 11 W, axial enameled wire wrapped power resistor, axial lead, fire-resistant power rating at 70 ° C | 9.5W ------------------------------------------------------------------------------------------------------------ C Body Length | 45.8 mm Body Diameter | 9.4 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.4981 -
![]()
Category: Plug in resistorDescription: RWM 6x22 Series 7W, axial enameled wire wound power resistor, rated power at 70 ° C with axis lead, power at 6W ---25 ° C, 7W resistance tolerance, ± 5% temperature coefficient,+75ppm/° C (typical value) limit element voltage, 350V temperature cycle, body length at -55 ° C+200 ° C, body diameter at 18 mm, lead length at 6.5 mm, lead diameter at 25 mm (minimum value), 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.7217 -
![]()
Category: Plug in resistorDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.9787 -
![]()
Category: Plug in resistorDescription: RWM 4x10 Series 3W, axial enameled wire wound power resistor, axial lead, fire-resistant Power rating at 70 ° C | 2.6W -------- Power at 25 ° C | 3W Resistance tolerance | ± 5% Temperature coefficient |+75ppm/° C typical limiting element voltage | 120V Temperature cycling | -55 ° C →+200 ° C C Body Length | 12 mm Body Diameter | 5.5 mm Lead Length | 25 mm min. Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.4818
